BSD Networks Inc.  2012

All Rights Reserved

RELATED ITEMS

BV-104C

Fiber Video Converter 4ch  Positive Video

Key Features and Specifications

Optionals

 

  • 8-bit digitally encoded and non-compression broadcast quality video transmission

  • Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols

  • Support any high-resolution video signal 

  • Automatic compatible PAL, NTSC and SECAM video system

  • Power supply and other parameter state indication, which can monitor the operation condition of system

  • Support no-damage regenerative trunk of video

  • Constant input optical power, and large dynamic range, no Electrical or Optical Adjustments Required .

  • Special ASIC design .

  • Industry-grade of operating temperature which is applied to the different working environment

  • Hot-swap function

 

OPTIONS:

AUDIO– add AR for 1 channel Audio Return; add BA for 1 channel  Bidirectional Audio

DATA– add 1D for 1 channel Positive Data; add DR for 1 channel Data Return

CONTACT CLOSURE– add CC for  1 channel Contact Closure

TELEPHONE– add 1T for  1 channel Telephone

ETHERNET– add 1E for  1 channel Ethernet

Data

Connector: Terminal Blocks

Encoded type : RS485 / RS422 / RS232 / Manchester

Data rate : 0 - 400Kbps

BER:  ≤10-9

Audio

Connector: Terminal Blocks

Audio input / output impedance :600Ω(Balance/ unbalance)

Audio input / output voltage :2Vp-p ( typical value)

Audio input / output level :0dBm ( typical value)

Video bandwidth:10HZ~12KHZ

Audio digital encoded bandwidth :24bit

Audio signal-to-noise ratio: S/N≥95dB  (weighted)

Telephone

Connector: RJ11

Bandwidth :8KHZ

Features：Support call-showing function ;support H-F

Operating mode : Point to point hotline mode / FXS-FXO

Ethernet

Connector: RJ45

Support mode : Half duplex or Full duplex

Standards：IEEE802.3

Data rate : 10M / 100Mbps

Bandwidth: 25M

Video channels

4 channel

Video bandwidth

8 MHz

Automatic compatible video system

PAL,NTSC,SECAM

Video input / output impedance

75 Ω (unbalance)

Video signal-to-noise ratio

≥67dB

Differential gain

(10%-90%APL） DG <1% ( typical value)

Differential phase

(10%-90%APL） DP <0.7° ( typical value)

Video connector

BNC

Fiber-optic Specification

 F/O connector: SC (Available ST and FC)

Transmitter:Tx Power:-8 ~ -3dBm   Sensitivity :≤-35dBm

Receiver：Tx Power:-15 ~ -8dBm   Sensitivity :≤-35dBm

Transmission Distance :20KM (single mode) 

Operating Wavelength: TX1310/RX1550nm（Transmitter)；TX1550/RX1310nm（Receiver） 

Dimensions

19.2 (L) x 17.3 (W) x 2.8 (H) cm

Operating Voltage

DC5V  included

Operating Temperature

-40 ° to +85° C

Storing Temperature

-55 ° to + 85° C

Humidity

0 to 95% non –condensing

MTBF

≥100,000 hours

Ordering Information (1 pair includes 1 receiver + 1 transmitter)

BV-104C

 Fiber Video  Converter 1 Positive Video  SC connection (a pair)

BV-104C-DR

Fiber Video Converter 1 Positive Video +1 Data Return SC connection (a pair)