BSD Networks Inc.  2012

All Rights Reserved

POWER PLANTS

TRANSPORTATION

WEATHER STATIONS

ALTERNATIVE ENERGY

CONTROL CENTRES

APPLICATIONS:

BM-1100TSC

BM-1100TSC series is 10/100/1000Mbps intelligent adaptive fast Ethernet media converter. It is a cost effective way to expand your existing fiber infrastructure to the gigabit 1000Base T Ethernet networks. The BSD-1100TSC has a switching core that allows the fiber connection to operate at 1000Mbps when connected to 10Base, 100Base or 1000Base T network.

more>>


BM-TS100C

This product supports asynchronous RS-232, RS-485, RS-422 communication interface, it is your best choice to connect the Remote Terminal Unit (RTU) to the Host (HOST) or Supervisory Control And Data Acquisition(SCADA) controller. This product complies with EIA-232-E,

TIA/EIA-485-A, TIA/EIA-422-A standards, Supports 2-wire RS-485 (half-duplex) and 4-wire RS422 (full duplex) work.more>>

BL-150 C Series

BL-150 C can perform birectional communications through a single fiber reducing the number of fibers used. The transmission/receiving wavelenght of one set is 1310/1550nm and on the other set is 1550/1310 nm; it must be used in matched pair.  more>> 

BL-100 Series

The BL-100 is used in applications where multimode or single mode fiber is installed. This type of converter can extend the transmission distance from  2km to 120 km. Each unit is powered by an external power supply. The powerful features are as 10/100 Auto Negotiation, Auto cross over for TP port, Fiber Link Alarm, Voltage supervisor, and support switch mode & pure converter mode. more>>

BM-120 Series

This converter provides one port Multi-Mode with the choice of  SC, ST fiber connector and one port Single-Mode SC fiber connector that can extend up to 120 km. It accomplishes Ethernet standards and has LEDs PWR/SDA/SDB. more>>

BM-1000SLC-20

The BM-1000SLC is a standalone 1000Base-SX multi-mode to single-mode converter. This special designed MM to SM converter allows customer to upgrade or expand their existing 1000M fiber network easily and cost effectively.

The BM-1000SLC is fully compliant with IEEE 802.3z standards, operates at 1000Mbps - half or full duplex mode.more>>

BM-1100LC-SFP

BM-1100LC-SFP Gigabit Ethernet 10/100/1000Base-T to 1000Base-SX/LX converter from BSD allows you to extend a copper based via fiber connection to a maximum distance 80KM. The installation & operation procedures of this converter  are simple & straightforward. User can monitor the real time operation status easily via a set of LEDs located in the front panel. more>>

BMC-1400R

This standard 19" chassis holds up to 14 media converters. It has a front LED panel for power and working status. It provides 2 cooling fans on the side and supports Power Redundancy & Power Isolation: two high quality features for load sharing purpose. If one power fails, the redundancy is capable to take over immediately. more>>