BSD Networks Inc. 2012
All Rights Reserved
RELATED ITEMS
BSD Industrial 6 10/100/1000TX +2 Giga/SFP Combo Managed Ethernet Switch
Key Features and Specifications
Ordering Information
| IEEE Standard | IEEE 802.3 10Base-T Ethernet IEEE802.3ad Port trunk with LACP IEEE802.1w Rapid Spanning Tree IEEE802.1p Class of Service |
| Switch Architecture | Back-plane (Switching Fabric): 1.6Gbps |
| Connector | 10/100/1000T: 6 ports RJ-45 with Auto MDI/MDI-X function RS-232 connector: RJ-45 type |
| Network Cable | 10/100/1000Base-T: 2-pair UTP/STP Cat. 5e/6 cable EIA/TIA-568 100-ohm (100m) SFP (Mini-GBIC): Multi-mode: 50/125μm~62.5/125μm Single-mode: 9/125μm |
| Protocol | CSMA/CD |
| LED | Per unit: Power (Green), Power 1 (Green), Power 2 (Green), Fault (Yellow), Master (Green) Per port: Link/Active (Green), Speed (1000 Green) Mini GBIC:Fiber: Link/Activity (Green) |
| Power Supply | 24 VDC(9 ~56 VDC); 24 VAC, Redundant power with polarity reverse protect function and connective removable terminal block for master and slave power |
| Power Consumption | 18 Watts |
| Operating Humidity | 5% to 95% (Non-condensing) |
| Case Dimension | Metal case. IP-30, 72mm (W) x 105mm (D) x 152mm (H) W model:59.6mm (W) x 118.47mm (D) x 161.6mm (H) |
| Installation | DIN Rail and Wall Mount Design |
| EMI | FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT),CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11,CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4 |
| Safety | UL, cUL, CE/EN60950-1 |
| Stability Testing | IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) |
| Management | SNMP v1 v2c, v3/ Web/Telnet/CLI/View Management |
| SNMP MIB | RFC 1215 Traps MIB, RFC 1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge MIB, RFC 2674 VLAN MIB, RFC 1643 EtherLike, RFC 1757 RMON, RSTP MIB, Private MIB, LLDP MIB |
| VLAN | IEEE 802.1Q Tag VLAN (256 entries) VLAN ID (Up to 4K, VLAN ID can be assigned from 1 to 4096.) |
| LLDP | Supports LLDP to allow switch to advise its identification and capability on the LAN |
| Quality of Service | The quality of service determined by port, Tag and IPv4 Type of service, IPv4/IPv6 Different Service |
| Class of Service | Supports IEEE802.1p class of service, per port provides 4 priority queues |
|
BSD-IGS-2206C : BSD Industrial Managed 6 10/100/1000-TX +2 Giga/SFP Combo Industrial Managed Ethernet Switch (-20 to 60 °C operating temperature) BSD-IGS-2206C-E : BSD Industrial Managed 6 10/100-TX +2 Giga/SFP Combo Industrial Managed Ethernet Switch MM (-40 to 75 °C wide operating temperature – special order) BSD-SFPGLC: 1.25 G 1310 nm 1000Base Multimode LC SFP Module 2km BSD-SFPGLC-20; 1.25G 1310nm 1000Base Singlemode LC SFP Module 20 km
|
- 6-port 10/100/1000T + 2 10/100/1000T/ Dual Speed SFP Combo w /Pro-Ring Managed Industrial Switch.
- RJ-45 Port Support Auto MDI/MDI-X Function.
- Store-and-Forward Switching Architecture.
- Back-plane (Switching Fabric):16Gbps
- 1Mbits Packet Buffer
- 8K MAC address table
- Wide-range redundant power design (9V to 56V)
- Supports IEEE 802.1d Spanning Tree
- Supports IEEE 802.1w Rapid Spanning Tree
- Provides EFT protection 3000 VDC for power line
- Supports 6000 VDC Ethernet ESD protection
- Provides redundant backup feature and the recovery time below 10ms
- Port Trunk with LACP
- Supports IEEE 802.1ab LLDP
- IEEE 802.1p CoS, per port provides 4 priority queues
- Port base, Tag Base and Type of Service Priority
- Supports Ingress Packet Filter and Egress Rate Limit.
- Supports Broadcast/Multicast Packet Filter Control
- Port Mirror: Monitor traffic in switched networks
- System Log Server/Client.
- SMTP e-mail Alert
- Relay Alarm Output System Events
- IP Security: IP address security management to prevent unauthorized intruder.
- Login Security: IEEE802.1X/RADIUS
- IGMP with Query mode for Multi Media
- TFTP Firmware Update and System Configure Restore/Backup.
- IP-30 Protection with DIN rail and wall mount design
BSD-IGS-2206C
